Skip to content
All systems operationalv0.16.69FREE TIER · 3 DEVICESTENVO AI · MCP FOR CLAUDE & CURSOR

Tenvo · Switching guide

Move a computer from AnyDesk, TeamViewer or RustDesk to Tenvo

Looking for an AnyDesk alternative? You can switch from TeamViewer or migrate from AnyDesk and RustDesk without visiting the PC. Use the remote session you already have one last time, install Tenvo on the customer's PC, check that Tenvo connects, then remove the old tool.

  • About 5 minutes per PC
  • Download 50 to 90 seconds, install about 20 seconds
  • Customer's part: “Accept” in AnyDesk or RustDesk, nothing in TeamViewer
Jump to the steps

Reach my own computers

Install once on each computer. Unattended access, free up to 3 devices.

Download Tenvov0.16.69 · Windows · macOS · Linux · signed

Other systems & all versions

Windows, macOS, Linux, Android and the web client — every installer, its version and how to check the signature.

All downloadsv0.16.69 · signed installers

$2.99/mo when you outgrow free · AnyDesk Solo: $28.90/mo, billed yearlySHA-256 · verifymacOS · Linux · Android

Before you start

  • A working session

    Your current tool still connects to the PC, or the customer is there to accept your request.

  • Admin rights on that PC

    Tenvo installs for all users as a Windows service, so Windows asks for approval once.

  • A Tenvo account on your side

    You connect from your own Tenvo app at the end.

Steps

  1. Connect with your current tool

    Start a normal session. With AnyDesk or RustDesk the customer sees a request and clicks “Accept”. With TeamViewer you connect with its ID and password as usual, and the customer does not need to click. If your old tool is a portable copy rather than installed, the customer also confirms the Windows prompt in step 3.

    AnyDesk waits until the customer accepts.
    They click “Accept”.
    RustDesk shows a small panel in the corner. Same button.
    You see their desktop. Minimise the old tool's panel.
  2. Download and start the Tenvo installer on their PC

    Open PowerShell on the customer's PC. The quickest way is to open File Explorer, click the address bar, type powershell and press Enter. Then run this line:

    iwr https://tenvoai.com/dist/Tenvo-Setup-x64-0.16.69.exe -OutFile Tenvo-Setup.exe; .\Tenvo-Setup.exe

    It saves the installer into the open folder and starts it. You can also open the download page in the customer's browser and click the Windows button. The result is the same file.

    If the pasted text does not arrive

    Remote tools can sync the clipboard with a delay. Check the pasted line before pressing Enter.

  3. Approve the Windows prompt

    Windows asks whether Tenvo Cloud Remote Desktop Setup may make changes. Check that the verified publisher reads UPDEVTEAM LTD and click Yes. Windows highlights No by default, so do not just press Enter.

    The prompt reaches you, so you can click Yes yourself.
    Same prompt, same publisher.
    TeamViewer hides the wallpaper. The prompt still reaches you.

    Don't see the Windows prompt?

    The prompt reaches you through AnyDesk, RustDesk and TeamViewer when they are installed on the customer's PC. If the old tool is a portable copy that is not installed, only the customer sees the prompt: ask them to click Yes.

  4. Install

    Click Install, then Next, then Finish. Tenvo installs for every user on the PC and runs as a Windows service, so it keeps working at the sign-in screen and after a restart.

    The installer says up front that Tenvo will run as a Windows service.
  5. Write down the Tenvo ID

    On first launch Tenvo shows the machine's ID. Give the machine a name you will recognise in your address book, such as the customer and the room, and continue. Wait for Online next to the ID.

    Name the machine and note the 9-digit ID.
    Online and Connected mean it is ready for you.

    The ID belongs to the machine. Reinstalling Tenvo on the same PC gives you the same ID, so your address book entry stays valid.

  6. Connect with Tenvo, then set up unattended access

    Keep the old session open. In your own Tenvo app, enter the ID and connect. For unattended access, open “Settings” → “Connection” → “Permanent password” in Tenvo on the customer's PC while you are still connected and set a password. Then add the machine to your address book.

  7. Remove the old tool

    Only after Tenvo connects on its own, uninstall the old tool from Windows Settings → Apps. Until then it is your way back in if anything goes wrong.

What we tested

We ran these steps in our lab on 14 November 2026 on a Windows 11 machine. All three ended with Tenvo running as a Windows service from the same installer. The screenshots come from that run.

Result of the lab run for each tool
Current toolCustomer's clickWindows prompt reaches youStatus
AnyDeskAcceptYes, when AnyDesk is installed Tested
RustDeskAcceptYes, when RustDesk is installed Tested
TeamViewerNone: you connect with the TeamViewer ID and passwordYes, when TeamViewer is installed Tested

Many computers at once

Repeating this per PC is fine for a handful of machines. For a fleet, push the same installer with the tool you already use for software: RMM, Group Policy or Intune. This line installs it silently:

Tenvo-Setup-x64-0.16.69.exe /S

In our lab the silent install finished in about 20 seconds, and the Tenvo service started by itself and came back after a restart. Then add each machine to your address book by its ID.

Questions

Can Tenvo connect to a PC that only has AnyDesk, TeamViewer or RustDesk?

No. Tenvo connects to PCs that run Tenvo, so it has to be installed first. This guide installs it through the session you already have.

How do I connect to the PC afterwards?

After installation the machine shows its ID. Enter that ID in your Tenvo app.

Which version is in the command?

The command is built from the installer file name this site publishes right now, so it matches the download page.

Ready to move your first PC?

Screenshots are from a lab machine. IDs of the technician's PC are blurred.